Diablo Controls DSP-7LP Microdetector Plug and Play Vehicle Detector with Low Power and Fail-Safe

OPERATION The Diablo DSP-7LP vehicle detector has been specifically designed for solar powered gate applications specifically for fail safe operations, such as on safety loops. This loop detector will operate on any voltage from 10 to 30 Volts AC or DC and draws approximately 1 milliampere while waiting for a car. The powe LED winks continuously once per second to indicate the detector is operating in the low power mode. The Diablo DSP-7LP detector has many of the same features as our standard Diablo DSP-7 but beats all competition for reliability, simplicity, and no car current consumption. This series of Diablo s detectors are covered by United States patent number US 7,132,959 Non-Interfering Vehicle Detection". These detectors are virtually crosstalk free in most applications. Working on battery-powered and other parking and access control loop applications, the Diablo Controls DSP-7LP is preset to the normal sensitivity level used in parking/access control applications, and tunes itself to the best operating frequency. This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. Environmental conditions are constantly compensated with the Diablo DSP-7LP HYPERTRACK software. FEATURES Loop Size - Works on any in-ground inductive loop from 20 to 1200 µH. Indicators - Separate Power and Detect LED s. The green Power LED will wink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle. Sensitivity - Automatic - compensates for large loops and large lead-ins. Output Ratings - Single output, 1 amp relay at 30 VDC Resistive - The relay common, NO, and NC contacts are available. Loop Failure - The green power indicator flashes twice per second if the loop circuit is open and 10 times per second if the loop circuit is shorted. This detector operates in the fail safe mode and will output a Detect fo

• The Diablo DSP-7LP vehicle detector has been specifically designed for solar powered gate applications specifically for fail safe operations, such as on safety loops. This loop detector will operate on any voltage from 10 to 30 Volts AC or DC and draws approximately 1 milliampere while waiting for a car.
• The power LED winks continuously once per second to indicate the detector is operating in the low power mode. The Diablo DSP-7LP detector has many of the same features as our standard Diablo DSP-7 but beats all competition for reliability, simplicity, and no car current consumption.
• This series of Diablo s detectors are covered by United States patent number US 7,132,959 Non-Interfering Vehicle Detection". These detectors are virtually crosstalk free in most applications.
• Working on battery-powered and other parking and access control loop applications, the Diablo Controls DSP-7LP is preset to the normal sensitivity level used in parking/access control applications, and tunes itself to the best operating frequency.
• This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. Environmental conditions are constantly compensated with the Diablo DSP-7LP HYPERTRACK software.